Recently ,A Spain customer (RYE) ordered bearing products before.
Later, we customized bushings for him and sent him sample tests.
The customer was very satisfied.
Orders will be placed one after another.
Soon, the customer talked to me about ordering a large order.My advice to him is not to rush to pay first.
Now the executed order is received.
Test and continue with new orders when you are satisfied. We hope every customer can receive products that reassure them.
Trusted partners this is our belief in working in the bearing industry for mang years
Our customers are our core focus, product quality is a constant demand of our production, constantly updated and improved machinery and equipment, strict standards for each production process, our production testing personnel are experienced veterans, and Solve any problems quickly with the highest level of professionalism, and customize the production of the required products according to the customer's requirements. Today, I will show you the entire process of shipping to this customer (RYE) from our production workshop. Rest assured about the product. Rest assured to us .
The whole process of (RYE) customer copper sleeve shipment:
Raw material - punching - graphite - rough turning - fine turning - cutting - chamfering - inspection - packaging - shipping

1. Raw materials

The first step is to inspect the material, exterior structure, specification, surface treatment, etc. of the raw materials, and return or reprocess the raw materials that do not meet the standards.

2. Punch holes

The inspected raw materials are punched. Our machinery and equipment are advanced and efficient.

3. Inlaid graphite

Graphite particles can produce a protective film after friction, which plays the role of self-lubrication, reduces friction damage between equipment, prolongs the overall service life and saves costs.

4. Rough turning (and cutting)

Most of the machining allowance is removed from the machined surface, and a large depth of cut and feed should be selected as far as possible within the allowable range. And divide the two connected copper sleeves.

5. Fine car

Meet the full size and technical requirements of the part, and measure and calculate many times.

6. Chamfering (inspection)

The process of removing edges and corners, and checking whether the product is qualified.

7.Packaging

8.Shipping