Pls Scan our customer service whatsapp
JTW-30
Properties
JTW-30 is made of two kinds of material, steel back sintered with CuSn6Zn6Pb3 powder as a Lining, then solid lubricant is embedded evenly in it. It is of cost effective and higher crash strength comparing with JDB-2 type, its ends can even be welded with machine part and assemble together. It is suitable for metallurgy machine, construction machine and where oil is hard to be employed. Base material: Bronze+CuSn6Zn6Pb3.
Technical Data
| Base material | Steel+CuSn6Zn6Pb3 |
| Material hardness | 60-90HB |
| Maximum temperaturet | 300°C |
| Max Move Load Capacity P | 70N/mm² |
| Coefficient of friction u | <0.14 |
| Max Sliding Speed | 2 |
| Max PV Value Limit | 0.6 |
| Density | 7.6 |
| Tensile Strength | >500 |
| Elongation | >10 |
Einsatzgebiete
| JTW-30 suitable for low load position, wear performance worsens when undermiddle or high load. The mating layer is same as CNP-JDB-20 so that more cost-saving than CNP-JDB-20whereas compression strength increases and weldable. Most suitable for dry position in construction machinery, metallurgical machines, conveyor machines etc. |
