Pls Scan our customer service whatsapp
JTW-40
Properties
JTW-40 is very good performance Under low load. Not suitable for middle or high load. A typical cost saving material. can substitute JDB-2 to be applied in the position without high requirements such as die guider, plastic injection machines etc.
Technical Data
| Base material | HT250 |
| Material hardness | 180-230HB |
| Maximum temperaturet | 400°C |
| Max Move Load Capacity P | 60N/mm² |
| Coefficient of friction u | <0.16 |
| Max Sliding Speed | 0.1 |
| Max PV Value Limit | 2.5 |
| Density | 7.8 |
| Tensile Strength | >1500 |
| Elongation | - |
Einsatzgebiete
| JTW-40 can be used under low speed rotation, middle and high load. Due to its super high hardness, when under high load, it over performs than other DB type. Not suitable for water. Acid, alkali circumstances. Most suitable for the supporting position of hoisting machine,e,g. Buldozer supporter, hoister supporter, Crane supporter etc. |
