Pls Scan our customer service whatsapp
JPBW-50
Properties
JPBW-50 is reinforced product of JDB series. It is based steel GCr15 and embedded with solid lubricant. It is of high compress strength and particularly suitable of supporting position in hositing machines,e.g. Thesupport or stand of windlass and of crane. But it should not be appliedin water or in acid/alkali circumstance. Can be used under low, middle and highload. Due to its superb high hardness, when under high load, it overperforms than other JDB type
Technical Data
| Base material | GCR15 |
| Material hardness | 55-60HRC |
| Maximum temperaturet | 350°C |
| Max Move Load Capacity P | 250N/mm² |
| Coefficient of friction u | <0.17 |
| Max Sliding Speed | 0.5 |
| Max PV Value Limit | 0.8 |
| Density | 7.3 |
| Tensile Strength | >250 |
| Elongation | - |
Einsatzgebiete
| JPBW-50 is a typical material product. It can instead of material of CNP-JDB-10 when the machanical preformance requirement not very high. It can reduct the costand meet the operation requiremert. Such as dieguider, plastrc in jection machines ect. |
